CHEMUNI联合化学Polycarboxylate ethers

Polycarboxylate ethers · export supply

Concrete workability, designed at the molecular level.

CHEMUNI makes polycarboxylate ether superplasticizers for concrete producers, precast plants and admixture blenders worldwide. Comb-shaped polymers, supplied as finished admixture or as mother liquor, tuned to the cement, sand and climate of the plant that uses them — and shipped with the documents your laboratory and your customs broker both ask for.

Specified to GB 8076-2008 · JG/T 223-2017 · ASTM C494 Type F/G · EN 934-2

BACKBONE PEO SIDE CHAINS –COO⁻ anchor CEMENT PARTICLE SURFACE
A comb-shaped polycarboxylate: carboxylate groups on the backbone anchor to the cement surface, PEO side chains extend into the pore solution and hold particles apart by steric hindrance.
25–40 %
water reduction at recommended dosage
0.15–0.60 %
dosage, by weight of binder
40 / 50 / 60 %
solids, mother liquor grades
12 months
shelf life, unopened, 5–35 °C

Typical envelope for the range. Real performance depends on your cement, supplementary cementitious materials, aggregate and temperature — every recommendation is confirmed by a trial on your own materials before a container is booked.

The range

Six grades, one backbone

All products →
CU-10050 ± 1 %

Water-reducing

High water reduction, balanced set.

  • Water reduction30–40 %
  • Dosage, % binder0.15–0.45 %
  • Retention≤ 1 h
Data sheet →
CU-20050 ± 1 %

Retain

Slump retention over long hauls and hot weather.

  • Water reduction25–35 %
  • Dosage, % binder0.20–0.60 %
  • Retention2–3 h
Data sheet →
CU-30050 ± 1 %

Early

Earlier strength, no chloride.

  • Water reduction25–35 %
  • Dosage, % binder0.20–0.50 %
  • Retention≤ 1 h
Data sheet →
CU-40050 ± 1 %

Clay-tolerant

Tolerance to clay-bearing sand and aggregate.

  • Water reduction28–38 %
  • Dosage, % binder0.20–0.55 %
  • Retention1–2 h
Data sheet →
CU-50050 ± 1 %

Viscosity-reducing

Lower plastic viscosity in low w/b and self-compacting mixes.

  • Water reduction28–38 %
  • Dosage, % binder0.20–0.60 %
  • Retention1–2 h
Data sheet →
CU-60050 ± 1 %

Shrinkage-reducing

Lower drying shrinkage, fewer restraint cracks.

  • Water reduction25–32 %
  • Dosage, % binder0.20–0.60 %
  • Retention1–2 h
Data sheet →

Mechanism

Why a comb disperses cement better than a straight chain

Lignosulfonates and naphthalene sulfonates work by electrostatic repulsion: they give every particle the same surface charge and the particles push apart. The force is strong but short-lived, and it saturates — once the surface is covered, more admixture buys nothing.

A polycarboxylate adds a second mechanism. Carboxylate groups anchor the backbone to the surface; the poly(ethylene oxide) side chains stay hydrated and extend into the pore solution. When two particles approach, those layers overlap, water is expelled from between them, and the osmotic and elastic penalty stops the particles short. That is steric hindrance. It does not saturate the same way, the thickness of the barrier is set by side-chain length, and the dosage needed is an order of magnitude below a naphthalene admixture.

How the molecule is designed →

PARTICLE PARTICLE LAYERS OVERLAP · STERIC REPULSION
Between two cement particles: overlapping adsorbed layers produce the steric repulsion that keeps the system dispersed.

Export and supply

What is in the container before the doors close

01

Packaging and loading

IBC totes, 200 L drums, flexitank or bulk tanker. Loading plans and photographs of the packed container are sent before the doors close, not after the vessel sails.

02

Documentation

TDS, a 16-section GHS safety data sheet, a COA for each batch, packing list and certificate of origin — issued before shipment. Market-specific declarations are confirmed per destination.

03

OEM and private label

Neutral drums, your artwork, your formulation — or mother liquor only, for you to blend. Formulations and customer lists do not cross.

Export and OEM details

Send us your mix design

Tell us the cement type, the clay content of your sand, the haul time and the ambient temperature. We answer with a dosage and a blend for your materials — trial first, container second.