The same grade, two plants, two different results
Three things change between plants before the admixture ever does: the cement, the sand and the clock. Here is the order to check them in.
Insights
These are the questions buyers and plant chemists keep asking. They are written out at length because the short answer is usually wrong: a dosage figure without the cement, the sand and the temperature says nothing.
Three things change between plants before the admixture ever does: the cement, the sand and the clock. Here is the order to check them in.
MB is a clay test, not an admixture test. Reading it as a dosage instruction is how good sand gets rejected and bad mixes get blamed on the polymer.
Most claims are not lost on the chemistry. They are lost on sampling, on the clock, or on a contract that never said what would be tested.
Shipping water across an ocean is expensive. Diluting 60 % mother liquor into a 12 % finished product is also a chemical operation, and it needs a bench, not a calculator.
Send the cement report, the sand MB value and the mix design. The answer is built on your materials, not on a generic data sheet.